Epoxy floor coatings in Eastern Goleta Valley CA - a coating that stays bonded
Garage or basement slab stained, dusty or shedding old paint? We test and grind it first, then coat it so it sweeps clean.
Is an epoxy coating right for my garage or basement floor?
Epoxy floor coating is a hard, sealed finish for garage, basement and other concrete floors, and in Eastern Goleta Valley most of the job is preparing the slab before the coating goes on.
If you're here, you probably have a garage floor with oil spots and dust that comes back the day after you sweep, or a basement slab you'd like to use as a real room. The price moves with the size of the floor, any leveling or crack repair, power washing, an added top coat and whether you want solid or solvent epoxy. The schedule turns mostly on what the moisture test says and whether the concrete is new, and my estimate puts in writing what your floor needs and how long it's off limits.
What our epoxy floor coating work includes
I start by checking the slab, because concrete can look dry and still push a coating off later, so we test it for moisture before we pick a product. If it fails, we don't coat it and hope. Once it passes, our crew cleans the floor, grinds the surface so the coating has something to bite into, then fills cracks and levels the low spots that need it. We vacuum up the dust, lay down primer and the epoxy coats, and add a top coat if you chose one. On a floor people walk across a lot, we mix grit into the coat so it's less slick, because a glossy floor and wet shoes don't get along.
Homeowners call us about garages more than any other room, so garage floor coatings has its own page with the systems that stand up to a parked car. Property managers who need a floor back fast should look at commercial and industrial epoxy floor coatings, where the plan starts from how little time the space can be closed.
Epoxy coatings and slab prep in Eastern Goleta Valley
Santa Barbara County's air district has a rule on architectural coatings that covers anyone applying them within the district. That rule lands on the people doing the applying, which is us, so we check the products we bring against it before the job starts.
Most of the slabs we coat around here are garage floors that have held a car, a freezer and years of drips, and basement floors that have never had more than a rug on them. The prep is the same on jobs in Goleta and Santa Barbara, so we grind off old paint and sealer and fix the cracks before anything new goes down. Concrete doesn't care how nice the top coat looks if the bottom was never ready.
How an epoxy floor job goes
Call or send the form
Call (805) 335-8374 or use the form, and tell us where the floor is and what you'd like done with it. We'll set a time for me to come look at it.
I test and measure the slab
I walk the floor, run the moisture test and look for cracks and low spots. The estimate lists what the floor needs and how long the space is off limits, so you see what's driving the price before you decide anything.
Our crew preps and coats
Clearing the floor yourself beforehand saves us moving your things, which can add to the price. Then our crew preps, repairs and coats the slab in the order the estimate lays out.
We walk the finished floor
When the last coat is down, we walk the floor with you and go over anything you want looked at. We also tell you when the space is yours again.
Get an epoxy and slab prep estimate in writing
Send the form and we'll get back to you within one business day to set a time. The estimate is free, done on site and comes with no obligation. I walk the floor, test the slab and write down what it needs and how long the space will be out of use.
What people ask about epoxy floor coatings
How much does an epoxy floor coating cost in the Santa Barbara area?
A cost guide puts epoxy floor coating in Santa Barbara at about $6 to $9 per square foot, covering materials, floor prep and application. That's the going rate in the area, not a quote from us. Where your floor lands comes down to its size and how much fixing the slab needs, which the estimate spells out.
Why does a concrete floor need a moisture test if it looks dry?
A slab can feel bone dry to the touch and still hold enough moisture inside to lift a coating within months. The coating maker sets the pass or fail limit, and no single number fits every product, so ask any contractor which limit their product calls for.
What can I do if my concrete fails a moisture test before epoxy?
The usual fixes are letting the slab dry and testing again, a primer made for damp concrete, a coating that limits vapor rising through the slab, or fixing the drainage or leak that's feeding it. Drying only works when the water is left over from the original mix and not coming up from the ground, so I'll tell you which one I think you've got.
How long does new concrete take to cure before an epoxy coating?
Most coatings call for concrete that has cured about 28 days and passed a moisture test. Some systems are made to go on early, over green concrete that's still curing, so ask about those if a month is too long to wait.
What is the best way to prepare concrete for an epoxy floor?
Grinding, shot blasting or scarifying, which roughen the concrete by machine, is preferred over acid etching for most high-performance coatings. It's a fair thing to compare between bids, so ask each contractor how they'll prep. Grinding and blasting also throw breathable silica dust, and a coatings reference says OSHA standards require controls such as vacuum collection or wet methods.
Should I pick epoxy or a concrete stain for my garage floor?
If budget comes first, a stain costs less than epoxy and is worth weighing. Epoxy gives you a sealed coat but can be slippery, which is why we add grit on busy floors, as I mentioned above.
Why Eastern Goleta Valley homeowners call us for epoxy floors
The owner writes every estimate
I come out to every job, look at the slab and write the estimate myself, and our own crew does the work. The person who wrote your prep plan is the one making sure it happens.
In business since 2021
Before we opened in 2021, I ran the schedule for a busy company and learned the floor work on other people's crews. That's why your estimate says in writing how long the space will be out of use.
Fully licensed and insured
We're fully licensed and insured. The state licensing board sorts contractors into classes, C-15 for flooring and C-33 for painting, so ask every bidder which one they hold.
Most floors that fail, fail at the bottom, not the top. Set up your estimate or call (805) 335-8374, and I'll come look at yours.
Other floor work you might need
Garage Floor Coatings
If the floor holds a car, hot tires, drips and dropped tools ask more of the coating, so read how we handle garage slabs.
Commercial & Industrial Epoxy Floor Coatings
Shops and warehouses that can't close for long need a coating plan built around how many hours the floor sits out of use.
Get your slab tested and epoxy floor priced
Call (805) 335-8374 or send the form with the floor size, any cracks or uneven spots and whether the concrete is new, so I show up ready for your slab.
