Metallic Epoxy Flooring in Eastern Goleta Valley CA - a smooth floor on a sound slab
Tired, stained or patchy concrete? We grind it clean and pour a metallic epoxy floor with a topcoat picked for your space.
Is my concrete right for a metallic epoxy floor?
Metallic epoxy flooring is a poured coating with metallic pigment worked by hand into swirls and depth, then sealed under a clear topcoat. In Eastern Goleta Valley it gives a garage, basement or shop floor a one-of-a-kind finish that sweeps clean. The work runs over a few days because each coat has to cure before the next one goes on.
Most people call because their concrete looks tired, stained or patched, or because an old coating is peeling and they want something better than plain gray. The price turns mostly on what's underneath, so the floor's size, how much old paint, sealer or coating has to come off, oil stains, cracks and the topcoat you pick all move it. The schedule turns on the prep and the cure time between coats, which decides how long you can't use the room, and I write both down on the estimate so you know what the floor needs and how long it's out of use before you commit.
What our metallic epoxy flooring job includes
Nothing hides a flaw under a metallic finish because there are no chips to cover a patch, a gouge or a ridge, so we start by diamond grinding the floor smooth and taking every bit of old coating, sealer and paint off. Concrete doesn't keep secrets under a metallic coat. Then we fill and grind out cracks, prime the slab so the color has something to grab, and pour the metallic base coat, moving the pigment while it's wet to shape the look you picked. The clear topcoat goes on last, and in a garage we settle that topcoat early, at the estimate, because sun through an open door is hard on some clear coats.
Metallic epoxy isn't the answer for every floor. If the room sees hot water, harsh cleaners or a lot of heavy rolling loads, urethane cement flooring handles that abuse better. If you like the concrete itself and want the least upkeep, polished concrete flooring grinds and polishes the slab with no coating on top.
Metallic epoxy and floor coating rules in Eastern Goleta Valley
The Building & Safety Division's list of work exempt from a building permit includes interior floor finishes, as long as the job fits how the list describes it. Whether yours does depends on the job and the address. Addresses around here answer to different offices, the County, a city or the campus, so we check with the right one before we schedule. If your job needs a permit, we pull it and fit the inspection into the plan. The same list recommends fire resistant materials for floor finishes in high fire hazard areas, so raise it at the estimate if your house sits in one. If you'd like to ask the County yourself, its Planning & Development office takes calls at 805-568-2000.
The garages we see here have usually lived a full life before we meet them, with oil drips, an old roll-on paint job or a sealer nobody remembers putting down. All of it comes up before any color goes down, and we find the same floors on jobs in Goleta and Santa Barbara.
How a metallic epoxy job works
Call or send the form
Call (805) 335-8374 or send the form, and we'll set a time for me to come see the floor. If you know the rough size of the room, that helps.
I check the slab and estimate
I look at the concrete, old coatings, stains and cracks, then write an estimate that says what the floor needs and how long the space is off limits. You see the prep laid out before you decide, so the price doesn't surprise you later.
Our crew preps and pours
Our own crew grinds, primes, pours the metallic coat and finishes with the topcoat over several days. Keep people, pets and cars off the floor between coats so each one cures clean.
We walk the finished floor
We walk the floor with you and look at anything you want a second look at. Then we tell you when it's ready for foot traffic and when the car can come back.
Get an estimate for a metallic epoxy garage or basement floor
We get back to you within one business day to set a time. I come out, look at the slab and write a free estimate on site that says what the floor needs and how long the space is off limits, with no obligation to book.
Questions before you book a metallic epoxy floor
How much does metallic epoxy flooring cost per square foot in Eastern Goleta Valley?
Across the US, a professional metallic epoxy installation usually runs about $8 to $15 per square foot, covering grinding, moisture testing, primer, the metallic base coat and a clear topcoat. That's a national figure, not our price, and your own number depends on how much prep your slab needs and which topcoat you choose, which is what the estimate spells out.
What topcoat should go over metallic epoxy on a garage floor?
An epoxy clear coat is the one to question in a garage, since one cost guide says it yellows within one summer of sun coming through the garage door. One coating maker highly recommends a urethane topcoat over its metallic coat to help prevent scratching, which is why we pick the topcoat at the estimate.
How long does a metallic epoxy floor last?
One cost guide rates a polyurethane topcoat as standard with a 10 to 15 year life, and a polyaspartic topcoat as the premium choice at 20 years or more, stable in UV light, for an added price per square foot. Those are the guide's numbers rather than a warranty, and our own promise is simpler. Your satisfaction, guaranteed.
How long does it take to install a metallic epoxy garage floor?
A standard garage takes 12 to 17 labor hours spread across 2 to 3 days, according to one cost guide, so plan for a job of several days rather than one visit. Each coat has to cure before the next goes on, and your estimate says how long the garage is off limits.
Can you put metallic epoxy over oil stains in a garage?
Old oil stains are the biggest risk to the bond, because one coating maker notes that oil soaked into concrete in most cases can't be fully removed and may keep the coating from bonding. Point out any old stains when you ask for a quote, so I can look at them closely and tell you straight what they mean for your floor.
How do I keep a metallic epoxy floor from being slippery?
Ask for a grit in the topcoat, because epoxy coatings can be slippery and granular materials can be added to make them less slick. It matters most on floors people walk on a lot, so we talk through how much texture you want before we order materials.
Why Eastern Goleta Valley homeowners call us for metallic epoxy
The owner writes every estimate
I come out to look at every job and write the estimate myself, and our own crew does the work. The person who saw your slab is the one who planned the prep, so nothing gets lost between the visit and the grinder.
Running floors since 2021
I learned floor work on other people's crews and spent years running the schedule for a busy company before opening in 2021. That's why we tell you plainly when the room is out of use and when you get it back.
Fully licensed and insured, in writing
We're fully licensed and insured. State rules require a home improvement contract to carry certain notices for your protection, and any change has to be in writing, easy to read and tell you about your right to cancel.
Coatings chosen under the air rule
The Santa Barbara County air district has a rule for anyone who sells or applies architectural coatings in the county, and that includes our crew. We pick products with that rule in mind, so what goes on your floor is allowed here.
The prep decides how a metallic floor looks for years, so book an estimate and I'll tell you what your slab needs.
Other floors worth comparing
Urethane Cement Flooring
Worth a look for a utility room or shop floor that takes hot water, harsh cleaners or heavy rolling carts more than a decorative finish would like.
Polished Concrete Flooring
If you'd rather keep the look of the concrete itself, polishing brings out a hard, low-upkeep shine without a coating to peel or wear through.
Plan your metallic epoxy garage or basement floor
Call (805) 335-8374 or use the form, and tell us the floor size, whether it's a garage and any oil stains or old coating, so I come out knowing what to check.
